Philips VR270B/07 - Manual (Page 33)

29
How to check, change or delete a
programmed recording (TIMER)
1
Press TIMER k on the remote control.
2
Select the programmed recording (TIMER) you want to check, change
or delete with P =r or P ;q .
Delete programmed recording
Press CLEAR (CL) .
'--' appears rather than the displayed values
To end, press
MENU .
01
3
Press TIMER k . The video recorder display will read, for instance,
'DATE
01' for the date of the recording.
If required, change the displayed information in this step and the
following steps using P ;q , P =r or the number buttons 0-9 .
01
4 Press TIMER k . The video recorder display will read, for instance,
'PROG.
01' for the programme number of the TV channel.
20:00
5 Press TIMER k .
The start time will appear in the video recorder display, e.g.
'START
20:00'.
22:00
6 Press TIMER k .
The end time will appear in the video recorder display, e.g.
'END
22:00'.
7 Press TIMER k . ' OK' will briefly flash in the video recorder display.
8 Switch off with STANDBY/ON m .
ENGLISH
Programming a recording (TIMER)