Recording, One touch recording, Cd synchro start recording – Philips C70 User Manual
Page 20: Dubbing tapes
3139 116 19441 (ENG)
20
TAPE
CD
PROG
CLOCK/
TIMER
NEWS!
RDS
DOLBY B
NR
STANDBY
ON
TUNER
AUX
PRESET ▲
▲
STOP • CLEAR
SEARCH • TUNING
PLAY PAUSE
PREV
NEXT
MINI HIFI SYSTEM
C D 1 • 2 • 3
VIDEO
FM • AM
TAPE 1 • 2
VOLUME
S
S
L
R
C
PRO LOGIC
FRONT
TIMER
STEREO
FM
BACK
HSD
REPEAT
LW
MW
AM
T.A.
NEWS
60Hz
500Hz
250Hz
1KHz
2KHz
4KHz
8KHz
REC
SHUFFLE
PROGRAM
UP
DOWN
PLAY
STOP.OPEN
PAUSE
▲ ▲
▲
▲
▲
RECORD
PLAY
STOP.OPEN
PAUSE
▲
▲ ▲
▲
▲
SOUND
SOUND NAVIGATION
DIGITAL SOUND
CONTROL
DYNAMIC BASS
BOOST
Notes:
– For recording, use only tape of IEC type
I (normal tape).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of Volume,
DBB or DSC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
One Touch Recording
• For One Touch Recording, as soon as
you press RECORD, the current
source (CD, TUNER or AUX) will be
recorded on tape deck 1.
1 Load a blank tape in tape deck 1.
2 Press RECORD on tape deck 1 to
start recording.
™ The
REC
starts flashing.
3 Press PAUSE to interrupt
recording.
4 Press STOP•OPEN on tape deck 1
to stop recording.
RECORDING
CD Synchro Start
Recording
During CD synchro start recording,
• Do not fast forward/rewind your
tape in tape deck 2.
• Do not listen to another source.
1 Load a blank tape into tape deck 1
and a disc into the disc tray.
2 Press CD.
• You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If you do
not, the tracks are recorded
according to the order on the
selected disc.
3 Press RECORD on tape deck 1 to
start recording.
™ The
REC
starts flashing.
4 Press STOP•OPEN on tape deck 1
to stop recording, then press Ç to
stop CD playback.
Dubbing tapes
(from tape deck 2
to tape deck 1)
1 Load the prerecorded tape into tape
deck 2 and a blank tape into tape
deck 1.
• Make sure both tapes have their full
spool to the left.
2 Press PAUSE on tape deck 1.
3 Press RECORD on tape deck 1.
4 Press PLAYÉ on tape deck 2.
™ The
REC
starts flashing.
pg 01-28/C50-C70/37-Eng
18/11/1999, 2:39 PM
20