Philips C70 - Manual (Page 16)

3139 116 19441 (ENG)
16
Repeat (only on remote control)
You can play the current track, a disc or
all available discs repeatedly.
1 Press REPEAT on the remote
control to select the various repeat
modes.
™ “TRACK”, “DISC”, “ALL” or
“ OFF” will be displayed.
™ The REPEAT appears on the
display.
• The selected track, selected disc or
all available discs will now be played
repeatedly until you press Ç.
2 Press REPEAT until the " OFF"
mode is displayed to resume normal
playback.
™ The
REPEAT disappears from the
display.
Notes:
– REPEAT DISC mode is not available
during program play or shuffle mode.
– You can also repeat shuffling a
program.
™ “TRACK“ or “PROGRAM" will
be displayed.
™ The REPEAT , PROGRAM and SHUFFLE
appear on the display.
CD TUNER
Shuffle (only on remote control)
In shuffle mode, the system plays all the
available discs and their tracks in
random order. Shuffle may be used also
when tracks are programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE.
™ “SHUFFLE” will be displayed.
™ The
SHUFFLE , the disc and the
track selected at random appear
on the display.
• The discs and the tracks will be
played in random order until you
press Ç.
• If you press REPEAT during
shuffling, the current track or all
available discs will be played
repeatedly.
™ “TRACK” or “ALL” will be
displayed.
™ The REPEAT and SHUFFLE appear
on the display.
2 Press SHUFFLE again to resume
normal playback.
™ The
SHUFFLE disappears from the
display.
Note:
– REPEAT DISC mode will be cancelled
when shuffle is selected.
TAPE CD
PROG
CLOCK/
TIMER NEWS!
RDS
DOLBY B NR STANDBY
ON
TUNER AUX
PRESET ▲ ▲
STOP • CLEAR SEARCH • TUNING PLAY PAUSE PREV NEXT
MINI HIFI SYSTEM
C D 1 • 2 • 3 VIDEO FM • AM TAPE 1 • 2
VOLUME
S S
L R
C
PRO LOGIC
UP
DOWN
FRONT BACK HSD REPEAT SHUFFLE PROGRAM REC LW MW AM T.A. NEWS TIMER FM
STEREO
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
SOUND SOUND NAVIGATION
DIGITAL SOUND
CONTROL
DYNAMIC BASS
BOOST
Note:
– For 'EASY SET' feature, please refer to
page 12.
Tuning to radio stations
1 Press TUNER (FM•AM) to select
TUNER mode.
™ “TUNER” will be displayed.
A few seconds later, the current
radio frequency will be displayed.
2 Press TUNER (FM•AM) again to
select the desired waveband : FM or
AM.
3 Press à or á for more than one
second, then release.
™ The display will show “SEARCH”
until a radio station with sufficient
signal strength is found.
• Repeat this procedure until the
desired radio station is reached.
• To tune to a weak radio station,
briefly press à or á repeatedly
until the display shows the desired
frequency and/or when the best
reception has been obtained.
pg 01-28/C50-C70/37-Eng 18/11/1999, 2:39 PM 16