Philips C70 - Manual (Page 13)

3139 116 19441 (ENG)
13
Selecting the Source
• Press the respective source selection
button: CD, TUNER, TAPE or
AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the
AUX IN terminals.
Selecting the Equalizer
Display
You can select the desired equalizer
display for the system. You must not
press the DSC button on the system
before using the SOUND
3 or 4
controls.
• Press the SOUND 3 or 4 to select
the desired Equalizer Display,
NORMAL, TOP DOWN, or NITE
MODE.
™ The selected display will be
shown.
NORMAL Display
FRONT FM
STEREO BACK HSD REPEAT REC LW MW AM T.A. NEWS TIMER
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
PROGRAM
OPERATING THE SYSTEM
TOP DOWN Display
FRONT FM
STEREO BACK HSD REPEAT REC LW MW AM T.A. NEWS TIMER
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
PROGRAM
NITE MODE Display
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
FRONT FM
STEREO BACK HSD REPEAT REC LW MW AM T.A. NEWS TIMER PROGRAM
Note:
– In NITE MODE, all lights will be
switched off and the display brightness
will be dimmed.
Sound Control
VOLUME ADJUSTMENT
Adjust VOLUME to increase or
decrease the sound level.
For Personal Listening
Connect the headphones plug to the
n socket at the front of the system.
The speakers will be muted.
DIGITAL SOUND CONTROL
(DSC)
The DSC feature enables you to adjust
the system to suit your type of music.
• Press DIGITAL SOUND
CONTROL (DSC) to select
OPTIMAL, CLASSIC, TECHNO,
JAZZ, ROCK or VOCAL.
™ The selected digital sound is
encircled.
™ “OPTIMAL X, CLASSIC,
TECHNO X, JAZZ X, ROCK
X or VOCAL X” will be
displayed. "
X" is the pre-selected
level.
With the SOUND 3 or 4 controls,
you can change the level of any DSC
setting except CLASSIC.
• First select the DSC feature, then
press the SOUND 3 or 4 until the
desired digital sound setting level is
reached.
™ The digital sound setting level will
increase or decrease between
level 1 and 5.
Note:
– For neutral setting, select CLASSIC and
switch off DBB.
DYNAMIC BASS BOOST (DBB)
There are three DBB settings to
enhance the bass response.
• Press DBB briefly to select a bass
boost level.
™ The respective DBB level is being
encircled and lit.
™ “BEAT”, “PUNCH” or “BLAST”
will be displayed.
To switch off DBB
• Press DBB briefly until “
DBB OFF”
is displayed.
Note:
– Some CDs or tapes might be recorded
in high modulation, which causes a
distortion at high volume. If this occurs,
switch off DBB or reduce the volume.
Automatic DSC-DBB selection
The best DBB setting is generated
automatically for each DSC selection. You
can manually select the DBB setting that
best suits your listening environment.
MUTE (on remote control only)
This feature allows you to temporarily
switch off the sound without switching
off the system when you require a
moment of silence.
• Press MUTE on the remote control
to switch off the sound.
™ “MUTE” will be displayed.
• Press MUTE again on the remote
control or increase the VOLUME
level to switch on the sound.
pg 01-28/C50-C70/37-Eng 18/11/1999, 2:39 PM 13