Panasonic 44-Series - Manual (Page 40)

3. Placing Outside Calls
38 Issued April 2000 DBS-32-755
programmed from the attendant’s phone. Once programmed, they are
available for everyone to use.
A maximum of 90, 200, or 500 SSD numbers are allowed, depending on the
system. SSD numbers are assigned to speed dial bins as follows:
You dial SSD numbers by entering the appropriate bin number. On small-
display and large-display phones, you can also use soft keys to dial a system
speed dial number in the SSD directory.
Dialing an SSD Number by Entering the SSD Bin Number
1. Pick up the handset or press ON/OFF.
2. If necessary, access an outside line.
3. Press AUTO.
4. Dial the appropriate SSD bin number.
Dialing an SSD Number Using the Soft Keys on a Small Display Phone
Note: Soft key functionality on the 44-Series small-display phone requires
DBS software version CPC-AII/B v. 8.0 or higher, CPC-S/M v. 2.0 or higher,
or CPC-EX v. 1.0 or higher.
1. Press the MODE key one time. “SSD” and “PSD” appears on the second
line of the display.
2. Press the soft key next to SSD. The first two SSD entries appear on the
second line of the display. To display the next two entries, press the “#”
key. To display the previous two entries, press the “*” key.
To jump to another letter in the directory, press the numeric key for it. For
example, press the “6” key to jump to the M’s, N’s and O’s. The M’s will
appear first. Press “6” again to jump to the N’s, and again to jump to the
O’s.
• For names beginning with Q or Z, use the 1 key.
Maximum
SSD Numbers Speed Dial Bins
90 00-89
200 000-199
500 000-499