Philips 20HFL3330D/10 - Manual (Page 37)

EN-25
EN
the channel.
Press
5. MENU to exit.
Manually update the channel 6�6
list
You can manually update the channel list.
Press 1. MENU on the remote control and
select Install > Channel installation >
Installation update.
Press
2.
Æ
to enter the Installation update
menu. Start now is highlighted.
Press
3. OK.
Press the green key to start the update. 4.
This may take a few minutes.
When the update is complete, press
5.
the red key to return to the Channel
installation menu.
Press
6. MENU to exit.
6�7 Test digital reception
If using digital broadcasts, you can check the
quality and signal strength of digital channels.
This allows you to reposition and test your
antenna or satellite dish.
Press 1. MENU on the remote control and
select Install > Channel installation >
Digital: Test reception.
Press
2. OK.
Press the green key to automatically start 3.
the test or manually enter the frequency of
the channel you want to test. If the signal
quality and strength is poor, reposition the
antenna or satellite dish and retest.
When complete, press the yellow key to
4.
store the frequency.
Press the red key to return to the
5.
Channel installation menu.
Press
6. MENU to exit.
Note: D If you have further problems with
the reception of your digital broadcast,
contact a specialised installer.