Philips HTS8141/12 - Manual (Page 13)

English
EN 13
Conne
c
t
Option 1: Connect to HDMI socket
HDMI IN
HDMI
OUT
1
Connect a HDMI cable (supplied) from the
HDMI OUT on this unit to the HDMI IN
socket on your TV.
Note
The HDMI connector is only compatible with HDMI •
compliant TVs and DVI-TVs.
Tips
To optimise the video output, see chapter ‘Adjust •
settings’ > [ Video Setup ] > [ Advanced Picture ]
for details.
This unit is HDMI CEC compatible. It enables •
connected TV/device to control each other over
HDMI, see chapter ‘Activate EasyLink control’ for
details.
Use a HDMI/DVI adaptor in case your TV has only •
a DVI connection. An extra audio connection is
needed to complete this connection.
To route the audio from your TV to this DVD Home •
Theatre unit, connect an audio cable from the audio
input on this unit to the audio output on your TV.
This type of connections provide best picture quality. •
Option 2: Connect to Scart socket
SCART OUT
(AUX-SCART)
SCART
1
Connect a scart cable (supplied) from the
SCART OUT (AUX-SCART) socket on
this unit to the scart input socket on your
TV.
Tips
To listen to the audio output from your TV, press •
AUDIO SOURCE repeatedly until ‘AUX SCART’ is
displayed on the display panel.
This type of connections provide good picture •
quality.
1_hts8141_12_eng7_Final_with Dock.indd 13 8/4/2009 2:30:54 PM