Phonetics IMS-4000 User Manual
Page 26
Enterprise Status
Unit
Type IP
Status
IMS-4000 Monitor
Host 10.1.4.10
Ok
NY_Node
Node 10.1.4.17
Ok
Press any key to return to main menu
Option 2 will display the network configuration for the Host as well as web server, RAS, and two-
way email settings. A sample of Option 2 is shown below:
Network and Option Configuration
Physical Address
00:D0:C9:37:40:86
IP Address
10.1.4.10
Subnet Mask
255.255.255.0
Default Gateway
10.1.4.1
DNS Server
10.1.2.111
Enterprise name
U.S. Widgets Inc.
Web Server
Enabled
Web Server Security
Disabled
Remote Access Server
Enabled
RAS IP Port Address
0.0.0.0
Two-Way E-mail Responder
Enabled
Microphone Listen-in
Enabled
Datamodem
Enabled
SNMP RO community
public
SNMP RW community
private
SNMP Agent
Enabled
Allow remote configuration
Disabled
Press any key to return to main menu
Option 3 will allow you to set all pertinent network settings listed under Option 2.
NOTE: You can remotely reconfigure the Host network settings using the IMS-4000
ConsoleView software if the Allow Remote Configuration option is set to Y. However, the Host
must initially be configured via the serial port before any remote configuration is possible.
Option 4 allows you to configure or reconfigure the Enterprise name.
Option 5 allows you to configure the Web server. When Web security is enabled, a Profile
Username & Password must be entered to view the web page. A sample of the Web configuration
menu is shown below:
Configure Web Server
1. Enable Web Server: Y/N
2. Enable Web Status Security: Y/N
3. Enable Web Programming option: Y/N
4. Enable Web Programming Security: Y/N
5. Return to main menu
IMS-4000 Manual
26