Operation, Starting the engine – Polaris Phoenix 9921841 User Manual

Page 39

OPERATION

Starting the Engine

1. Position the vehicle on a level surface outdoors or in a well-venti-

lated area.

2. Place the transmission in neutral.
3. Lock the parking brake.
4. Turn the fuel valve on.
5. Sit on the vehicle.

Tip: Do not use the choke if starting a warm engine.

Excessive use of the choke can cause the spark

plug to become wet fouled.

6. If the engine is cold, move the choke lever

to the left until it stops.

Tip: The choke is fully on when the lever is com-

pletely to the left. The choke is off when the

lever is completely to the right. The choke can

be adjusted gradually, depending on how much

choke is needed for starting.

7. Place the engine stop switch in the ON

position, then turn the main key switch on.

8. Do not press the throttle while starting the

engine. Squeeze the left brake lever.

Tip: The starter will not engage unless the rear brake is applied. Always

squeeze and hold the left brake lever before attempting to start the engine.

9. Press the start button.

Choke

Lever