Programmable features 48 – Panasonic KX-FL511 User Manual

Page 50

7. Programmable Features

To cancel after programming, press {STOP}
then {SET}.

Code #26: Setting the Caller ID list to print
automatically

AUTO CALL. LIST
MODE=ON

[

±]

“ON” (default): The unit will print the Caller ID list
automatically after every 30 new calls (page 33).
“OFF”: The unit will not print the Caller ID list, but
keep a record of the last 30 caller information.

Code #31: Activating the Distinctive Ring
feature

DISTINCTIVE RING
MODE=OFF

[

±]

See page 42 for details.

Code #32: Setting the ring pattern for fax
(Distinctive Ring feature)

FAX RING PATTERN
RING=B–D

[

±]

See page 43 for details.

Code #37: Receiving other size documents

AUTO REDUCTION
MODE=ON

[

±]

To receive a fax document that is longer than
your recording paper.
“ON” (default): The unit will fit received
documents onto your recording paper.
“OFF”: The unit will print the original size.

Code #39: Changing the display contrast

LCD CONTRAST
MODE=NORMAL

[

±]

“NORMAL” (default): For normal contrast.
“DARKER”: Used when the display contrast is too
light.

Code #41: Changing the fax activation code

FAX ACTIVATION
MODE=ON

[

±]

If you use an extension telephone and wish to
use it to receive a fax, activate this feature and
program the activation code.

1. Press {MENU}.

2. Press {#}, then {4}{1}.

3. Press {A} or {B} repeatedly to select “ON”.

4. Press {SET}.

5. Enter your code from 2 to 4 digits, using 0–9,

{*}

and {#}.

The default code is “;#9”.

Do not enter “0000”.

6. Press {SET}.

7. Press {MENU}.

Code #44: Setting the memory reception alert

RECEIVE ALERT
MODE=ON

[

±]

To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
“ON” (default): You will hear a beeping sound.
“OFF”: Deactivates this feature.

Code #46: Setting friendly reception

FRIENDLY RCV
MODE=ON

[

±]

To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
“ON” (default): You do not have to press {FAX
START} for fax reception.
“OFF”: You have to press {FAX START} for fax
reception.

Code #68: Setting the Error Correction Mode
(ECM)

ECM SELECTION
MODE=ON

[

±]

This feature is available when the
transmitting/receiving fax machines are ECM
compatible.
“ON” (default): To send a fax even if there is static
interference on the telephone line.
“OFF”: Deactivates this feature.

Code #76: Setting the connecting tone

CONNECTING TONE
MODE=ON

[

±]

If you often have trouble when sending faxes,
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use those tones to confirm the status of the other
party’s machine.

If the ring back tone continues, the other
party’s machine may not be a facsimile or
may have run out of paper. Check with the
other party.

The connecting tone volume cannot be
adjusted.

FL511.book Page 48 Thursday, April 17, 2003 1:42 PM