Programming undesired callers, 8 programming undesired callers, 1 activating the junk fax prohibitor – Panasonic KX-FL511 User Manual
Page 43
4. Fax
41
Additionally, faxes originating from numbers that
match a programmable junk fax prohibitor list will
not be accepted by the fax machine (page 41).
L
Keep the front cover page open for button
locations.
Important:
L
This feature does not work when:
–
the unit is set to the TEL mode, or
–
manual reception is performed.
4.7.1 Activating the junk fax
prohibitor
1
Press {MENU} repeatedly to display “JUNK
FAX PROH.
”.
2
Press {>}.
3
Press {A} or {B} repeatedly to select “ON”.
4
Press {SET}.
5
Press {STOP} to exit the program.
L
While the junk fax prohibitor is activated,
“JUNK FAX ON” is displayed.
4.8 Programming
undesired callers
You can register up to 10 undesired numbers
from the caller’s list if you do not wish to receive
faxes from them.
L
Keep the front cover page open for button
locations.
1
Press {MENU} repeatedly to display “JUNK
FAX PROH.
”.
2
Press {>} repeatedly to display “JUNK
LIST SET
”.
3
Press {SET}.
4
Press {A} or {B} repeatedly to display the
entry you wish to prevent the fax reception
from.
5
Press {SET}.
L
To program other entries, repeat steps 4
to 5.
6
Press {STOP} to exit the program.
Note:
L
If there is no space to store new entries,
“LIST FULL” is displayed in step 4. Erase
unnecessary entries.
To display the junk fax prohibitor list
1. Press {MENU} repeatedly to display “JUNK
FAX PROH.
”.
2. Press {>} repeatedly to display “JUNK LIST
DISP.
”.
3. Press {SET}.
4. Press {A} or {B} to display the entry.
5. To stop viewing, press {STOP}.
6. To exit the list, press {STOP}.
To print the junk fax prohibitor list
1. Press {MENU} repeatedly to display “JUNK
FAX PROH.
”.
2. Press {>} repeatedly to display “JUNK LIST
”.
3. Press {SET}.
4. Press {STOP} to exit the list.
To erase an entry from the junk fax
prohibitor list
1. Press {MENU} repeatedly to display “JUNK
FAX PROH.
”.
2. Press {>} repeatedly to display “JUNK LIST
DISP.
”.
3. Press {SET}.
4. Press {A} or {B} repeatedly to display the
desired entry.
5. Press {<}.
L
To cancel erasing, press {STOP}, then
press {MENU}.
6. Press {SET}.
L
The entry is erased.
7. Press {MENU} to exit the list.
FL511.book Page 41 Thursday, April 17, 2003 1:42 PM