Pt- ae4000 e – Panasonic PT-AE4000E User Manual

Page 6

Please contact Panasonic or your dealer for a demonstration.

JQA-0443

051

EC98J2010

Factories of Systems Business Group have received ISO14001:2004 –
the Environmental Management System certification. (Except for 3rd
party’s peripherals.)

Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to export control

regulations. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. “x.v.Colour”

is a trademark of Sony Corporation. All other trademarks are the property of their respective trademark owners. Projection images simulated.

All information included here is valid as of September 2009.

P T - A E 4 0 0 0 E 2 Printed in Japan.

Other Features

• Seven picture mode includes Cinema 1,

Cinema 2, Cinema 3, Normal, Dynamic,
Colour 1 and Colour 2.

• 3D noise reduction for high-precision noise

detection and reduction

• Scene-adaptive MPEG noise reduction effec-

tively blocks regular noise and minimises
mosquito noise.

• Scene adaptive resizing LSI improves quality

when resizing 480p images or those from
other sources with resolution lower than the
PT-AE4000E’s native resolution.

• 24p compatible
• Progressive cinema scan (3/2 pulldown) and

HD IP

• Selectable frame response

• Featuring a wide range of aspect modes,

including ones for anamorphic lenses.
(JUST/4:3/16:9/S16:9/14:9/ZOOM1/ZOOM2/
H-FIT/V-FIT)

NOTE

The selectable modes vary

depending on the input signal.

• Up to sixteen sets of adjust-

ment settings can be stored in
memory with custom names
that make them easy to
remember

• Masking function to match the

desired projection area to the
screen.

• User-friendly ergonomic

remote control

• Built-in test pattern including

colour bar and gray scale

• On-screen input guidance
• Auto input search
• Quiet operation: 22 dB (in Economy lamp

mode)

• Normal/Eco lamp power selection
• Lens-centred design

Made in Japan
Each Panasonic projector is
produced by a vertically inte-
grated production process, which
extends from R&D to manufactur-
ing, at the Panasonic factory in Japan, under
strict quality control. This ensures stable, top-
quality performance in every product.

Supplied remote
control with
back-lit buttons

For detailed explanation of features please visit our Project Global Web Site

h t t p : / / p a n a s o n i c . n e t / a v c / p ro j e c t o r

PT-AE4000E

Full High-Defi nition Home Cinema Projector

Up to 220 V. *

The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-

precision technology designed to provide one of the finest possible images. Occasionally, a few pixels may remain turned on (bright) or turned off
(dark). Please note that this is an intrinsic characteristic of the manufacturing technology that affects all products using LCD technology.
*

The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to

illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on
individual lamp characteristics and usage conditions. *

Measurement, measuring conditions, and method of notation all comply with ISO 21118

international standards. *

In dynamic mode, with dynamic iris on. *

Shift range is limited during simultaneous horizontal and vertical shifting.

Effective in Colour 1 image mode. *

CEC is an abbreviation for Consumer Electronics Control. Operation may not be possible with some con-

nected equipment or settings. *

Protruding parts are not included. *

Average value. May differ depending on models.

Specifications

Power supply
Power consumption
LCD panel*

Panel

size

Aspect

ratio

Display

method

Drive

method

Pixels
Lens
Lamp*

Brightness*

Contrast*

signal compatibility

Colour system
Optical axis shift*

Keystone correction range
Terminals
HDMI

COMPUTER

COMPONENT

TRIGGER

IN/OUT

S-VIDEO

VIDEO

SERIAL
Dimensions*

(W x H x D)

Weight*

Operating environment
Supplied accessories
Optional accessories
ET-LAE4000

ET-PKE2000
ET-PKE1000S
ET-PCE2000

100 –240 V AC, 50/60 Hz
240 W (Approx. 0.08 W*

in standby mode with fan stopped)

0.74˝ (17.78 mm) diagonally
16:9 aspect ratio
Transparent LCD panel (x 3, R/G/B)
Active matrix
2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels
Powered zoom (2x)/powered focus, F 1.9–3.2, f 22.4 mm– 44.8 mm
170 W UHM lamp
1,600 lumens*

100,000:1*

(full on/full off)

480i (525i), 480p (525p), 576i (625i), 576p (625p), 720 (750)/50p, 720 (750)/60p, 1,080
(1,125)/24p, 1,080 (1,125)/50i, 1,080 (1,125)/50p, 1,080 (1,125)/60i, 1,080 (1,125)/60p
PAL, PAL-M, PAL-N, PAL 60, SECAM, NTSC, NTSC 4.43,
Horizontal: ±40% and vertical: ±100%
Vertical: approx. ±30°

HDMI connector x 3, HDMI™ (Deep Colour, x.v.Colour™*

, CEC*

), HDCP compliant, supports

HDAVI Control Version 4
D-sub HD 15-pin (female) x 1
RCA pin (Y, P

, P

) x 1

M3 x 2 (input/output selectable)
Mini DIN 4-pin x 1
RCA pin x 1
D-sub 9-pin x 1 (RS-232C based)
460 x 130 x 300 mm (18-1/8˝ x 5-1/8˝ x 11-25/32˝)
Approx. 7.3 kg (16.1 lbs.)
Temperature: 0°–40°C (32°–104°F), Humidity: 20%–80% (no condensation)
Power cord, Wireless remote control unit, Batteries for remote control (R6/LR6 type x 2)

Replacement lamp unit
Ceiling mount bracket for high ceilings
Ceiling mount bracket for low ceilings
Cable cover

Diagonal length

Projection size (16:9)

Projection distance (L)

Min (Wide)

Max (Telephoto)

1.02 m

1.52 m

2.03 m

2.54 m

3.05 m

3.81 m

5.08 m

6.35 m

7.62 m

1.2 m

1.8 m

2.4 m

3.0 m

3.6 m

4.5 m

6.1 m

7.6 m

9.1 m

2.3 m

3.5 m

4.7 m

5.9 m

7.1 m

9.0 m

12.0 m

15.0 m

18.0 m

40˝

60˝

80˝

100˝

120˝

150˝

200˝

250˝

300˝

3´11˝

5´10˝

7´10˝

9´10˝

11´10˝

14´9˝

19´9˝

24´8˝

29´8˝

7´9˝

11´8˝

15´8˝

19´7˝

23´7˝

29´6˝

39´5˝

49´4˝

59´3˝

Image size/projection distance

Aspect ratio 16:9

Diagonal length

Projection size (2.35:1)

Projection distance (L)

Min (Wide)

Max (Telephoto)

1.02 m

1.52 m

2.03 m

2.54 m

3.05 m

3.81 m

5.08 m

6.35 m

7.62 m

1.3 m

1.9 m

2.6 m

3.2 m

3.8 m

4.8 m

6.4 m

8.0 m

9.6 m

–

2.8 m

3.8 m

4.7 m

5.7 m

7.1 m

9.5 m

12.0 m

14.4 m

40˝

60˝

80˝

100˝

120˝

150˝

200˝

250˝

300˝

4´1˝

6´2˝

8´3˝

10´5˝

12´6˝

15´7˝

20´10˝

26´1˝

31´4˝

–

9´3˝

12´5˝

15´7˝

18´9˝

23´6˝

31´5˝

39´4˝

47´3˝

Aspect ratio 2.35:1

(When projecting both 2.35:1 and 16:9 images onto a
2.35:1 screen using the Lens Memory function.)

L (LW/LT)

(2,1) -1- PT-AE4000E2.indd 09.9.18 8:30:35 AM