Panasonic KX-TG5832AL - Manual (Page 19)

Making/Answering Calls
19
Useful features during a
call
HOLD button
This feature allows you to put an outside
call on hold.
KX-TG5831AL:
Press {HOLD} during an outside call.
L “Hold” will be displayed.
L
To return to the call, press {C} or {s}.
KX-TG5832AL:
1
Press {HOLD} during an outside call.
L
To transfer the call to the other
handset, see page 31, step 2.
2
Press {HOLD} again.
L
“Hold” will be displayed.
L To return to the call, press {C} or
{s}
.
L
The other handset user can take the
call by pressing {C} or {s}.
Note:
L
“Line on hold” will be displayed on
the other handset (KX-TG5832AL only).
L If another phone is connected on the
same line (page 9), you can also take
the call by lifting its handset.
L
If a call is kept on hold for more than 6
minutes, an alarm tone will start to
sound and the ringer indicator will flash
rapidly. After 4 additional minutes on
hold, the call will be disconnected.
MUTE button
You can mute your voice during a
conversation. While mute is turned on you
will be able to hear the other party, but the
other party will not be able to hear you.
To mute your voice, press {MUTE}.
L
“” will flash on the display.
L To return to the conversation, press
{
MUTE}, {C}, or {s}.
Voice enhancer
This feature can simulate a band signal
above the normal bandwidth limitations,
achieving a sound which is close to the
actual voice. You can turn this feature on
or off, depending on the circumstance.
1
Press {MENU} during an outside call.
2
To turn this feature on or off, press {3}.
L You can also select “V.E. on” or
“V.E. off” by pressing {V} or {^}
then pressing {
>}.
L When turned on, “J” will be
displayed.
Note:
L Once you turn voice enhancer on, it will
be activated for all outside calls until
turned off.
L
You can also turn this feature on or off by
programming (page 35).
L
Depending on the condition and quality
of your telephone line, this feature may
emphasise existing line noise. If it
becomes difficult to hear, turn this
feature off.
Example:
Talk
00-00-30
g3=V.E. on
TG5831_5832AL.book Page 19 Monday, March 14, 2005 4:28 PM