Pentax Optio MX - Manual (Page 24)

22
Windows 2000/Me
1
Double-click the [Unplug or
eject hardware] icon in the
task bar notification area.
The [Unplug or Eject Hardware] screen
appears.
2
Confirm that [PENTAX USB
DISK Device] is selected and
click [Stop].
The [Stop a Hardware device] screen
appears.
3
Confirm that [PENTAX USB
DISK Device] is selected and
click [OK].
A message appears.
4
Click [OK].
5
Disconnect the camera from your PC.
• If the camera (removable disk) is being used by an application
such as ACDSee for PENTAX, the camera cannot be
disconnected until the application is closed.
• In the event that an error message appears in step 4, confirm that
the Focus status lamp is not blinking and then disconnect the
camera.
• The camera will turn off automatically when the USB cable is
disconnected.
e_00_pc_kb353.book Page 22 Wednesday, April 28, 2004 1:27 PM