Pentax Optio MX - Manual (Page 18)

16
After installing the necessary software on your computer, you must now
set up your digital camera to transfer images from the camera to your
computer.
1
Press the MENU button.
The [A Rec. Mode] menu or the [Q Playback] menu appears.
2
Press the four-way controller (5) to display the
[B Set-up] menu.
3
Use the four-way controller (23)
to select [USB Connection].
4
Use the four-way controller (45)
to select [PC].
5
Press the OK button.
Setting Up Your Digital Camera
Setting the USB Connection Mode to [PC]
• Do not connect the camera to your PC while [PictBridge] is
selected for the USB Connection mode.
• Do not connect the camera to your PC while [PC] or [PC-F] is
selected for the USB Connection mode.
If image or sound data does not transfer successfully, switch [USB
Connection] to [PC-F].
MENU
PC PC
NTSC NTSC
Set-up
Screen Setting
Brightness Level
Video Out
USB Connection
Sleep Timeout
Auto Power Off
1min 1min
3min
3min
Exit OK OK
e_00_pc_kb353.book Page 16 Wednesday, April 28, 2004 1:27 PM