Precision Power 355cs User Manual
Page 3
introduction
Thank you for choosing Precision
Power™ automotive component loudspeakers .
These reference quality speakers combine the acoustic excellence achieved from
25 years of loudspeaker research and development, with innovative and timeless
industrial design, and cutting edge material choices . Tuned for precise reproduction
of the supplied musical signal, they accurately deliver every nuance and detail
while retaining the classic "Precision
Power™ sound" that has enchanted multiple
generations of owners . With a minimum of care, this high performance component
speaker system will deliver years of trouble-free satisfaction .
about this manual
To achieve optimum performance from your Precision
Power™automotive
component loudspeakers, we recommend that you read this manual thoroughly
before installation and use . For the best results and support, please consult
with your local authorized Precision
Power™ retailer . Technical support is also
available from Precision
Power™ at 1-800-753-0800 selection 3 . Keep this
manual in a safe place for future reference .
features
Molded woofer basket - The backbone of any good woofer is its basket . It provides
the proper alignment and support structure for the magnet and moving parts while
the very thin braces guarantee a minimum of early reflections off the basket that
would be ordinarily transmitted as sonic colorations through the cone .
Woofer cone - Interlaced Aramid Fiber (Kevlar) with Mica and fiberglass mixture
in a IMPP (Injection Molded Poly Propylene) base, cones provide the perfect
combination of rigidity and low moving mass for ultra-low distortion and superior
transient response .
Vented voice coil - Magnet cooling vent construction enhances power handling
capabilities of the woofer . The voice coil is made using copper clad aluminum wire
to minimize weight and increase efficiency and low frequency response .
Extended center pole - Woofer magnet geometry provides a symmetrical magnetic
pattern to reduce THD .
Tweeter - Ultra-light silk dome design is treated with polymer compound to control all
non-linear resonances .
Multi-mount tweeter - The following mounting options (surface, angled surface,
flush, or angled flush) are supplied to mount the ferrofluid cooled neodymium
tweeter .