Precision Power 355cs - Manual (Page 13)

1
Tweeter
Coaxial
Extension
Tweeter
Speaker
Wires
Mounting
Slots (qty 4)
Mounting
Tabs (qty 4)
CAUTION: Do NOT overtighten the tweeter assembly .
Now feed the tweeter speaker wires through the front center of the woofer (where
the aluminum bullet was removed) As shown in the next illustration . Align and
thread the coaxial tweeter assembly on the threaded post in the center of the
woofer . rotate the coaxial tweeter assembly clockwise until snug . Connect the
tweeter wires to the tweeter output from the crossover .
Turn tweeter
coaxial mount
assembly
clockwise
Threaded mounting
post
The tweeter is mounted at and angled relative to the woofer . Before final woofer
mounting, rotate the woofer so that the tweeter is pointed in the desired direction,
typically towards the listener's ear location .
surface mount (Straight or Angled)
The preparation of the mounting surface for the tweeter involves drilling three
holes . Two holes are for the mounting screws . Their centers must be spaced15/16”