Pentax 645N2 - Manual (Page 89)

OTHERS
87
Symptoms Causes Remedies Reference
The subject is too close or difficult to
autofocus.
The camera may be defective.
Use the focus-lock technique or
focus manually using the matte
field.
• Press the mid-roll wind-up button
to wind the film, then consult your
Pentax distributor or authorized
Pentax repair shop.
• [ ] indication stays on and bat-
tery warning [ ] blinks even
if the mid-roll wind-up button is
pressed. In this situation, replace
the battery and press the mid-roll
wind button again.
P.62, P.63 [ ] blinks in the viewfinder.
[ ] blinks on the LCD
panel.