Pentax 645N2 - Manual (Page 28)

UNLOADING THE FILM IN MID-ROLL
26
BASIC OPERA
TION (PREP
ARA
TION)
4 1 2 3
If you wish to remove the film before exposing all
the frames, use this function.
1. Set the main switch to [ ON ].
2. Press the mid-roll wind-up button fully with a
fine-pointed object. The film will wind com-
pletely.
3. Before detaching the film holder, check that
[ ] is displayed on the LCD panel.
4. While firmly holding the wound film roll, affix
the paper seal securely on the back of the
paper leader to prevent from accidental
unwinding of the exposed roll.
• The number of exposed frames on the LCD panel
disappears from the LCD panel.
• When removing the film from the camera, protect
it from exposure to direct sun light.