Using the remote control unit, Loading dry cells, Effective range of remote control operation – Panasonic PT-D3500U User Manual

Page 14

Using the remote control unit

Loading dry cells

When loading batteries into the battery
compartment of the remote control, make sure that
their polarities are correct.

1. Open battery compartment lid.

Open the lid in the order of steps

and

2. Insert the dry cells.

Into battery compartment, with their polarities
orientated as indicated (

) in the

compartment.

3. Close the battery compartment lid.

Replace the battery compartment lid over the
compartment and slide until it clicks.

Effective range of remote
control operation

The remote control should normally be aimed at either
the front or rear remote control receiver window on
the projector (figure 1). Otherwise, it may also be
aimed at the screen, which will reflect commands
back to the projector’s front receiver window as
illustrated in figure 2.

The effective control range is approx. 7 meters from
the beam receiver on the front or rear.

• Do not drop the remote control unit.
• Do not expose remote control unit to

any liquid.

• Do not use NiCd batteries.

Attention

Note

• When the remote control is aimed at

the screen, the effective control range
may be reduced due to the optical loss
by screen reflection.

• The remote control may not function

properly if an object is in the light path.

• The remote control receiver may not

function properly in intense ambient
light such as fluorescent lamps.
Carefully site the projector so its
remote control receiver windows will
not be directly exposed to intense
light.

Accessory type-AAA dry
batteries (insert the negative
side first).

(Front)

(Rear)

[Top view]

[Side view]

Remote
control

15˚

30˚

Remote control
receiver window
(rear)

Remote control
receiver window
(front)

Projector

Remote control

Screen

Figure 1

Figure 2