Troubleshooting – Panasonic UF-585/595 User Manual
Page 144

142
(see Note 1)
540/541
542
543/544
Communication error occurred while transmitting.
1. Reload the document and send again.
2. Check with the other party.
--
550
Telephone line disconnected.
Check with the other party.
--
552/553
554/555
Communication error occurred while receiving.
Check with the other party.
--
580
Sub-address transmission to a unit that has no Sub-
address function.
Check the remote station.
581
Sub-address Password transmission to a unit that has
no Password Sub-address function.
Check the remote station.
601
ADF Door was opened during ADF transmission.
Close the ADF Door and send again.
623
No document loaded on the ADF.
Reload the document and send again.
--
630
Redial was not successful due to a busy line.
Reload the document and send again.
--
631
During dialing, STOP was pressed.
Reload the document and send again.
--
634
Redial was not successful due to no response from the
called station, wrong number dialed or busy tone was
not detected.
Note: If busy tone is not detected, the machine will
only redial once.
Check the telephone number and send again.
--
638
Power failure occurred during the communication.
Check the power cord and plug.
800 - 816
825
Parameter setting for Confidential Network or Relay
communication is not properly set.
Verify your Confidential Network and Relay
communication parameter settings.
870
Memory overflow occurred while storing documents
into memory for transmission.
1. Transmit documents without storing into
memory.
2. Install Optional Memory Card.
1. After identifying the problem and verifying the recommended action, if the information Codes keep reoccuring or for
help on Information Codes that appear on your machine but are not listed above, please contact your local
Panasonic Authorized Dealer.
Info.
Code
Meaning
Action
Page
Troubleshooting
Note: