Pioneer RM-V4000V - Manual (Page 69)

68
V PHASE
(V STATIC when
MULTI ON)
3,4,7 center adjustment
Set to only green and adjust the center with V PHASE
H PHASE .
When MULTI ON, as V PHASE does not
move, adjust it at the splitter side.
If not possible, adjust with V STATIC
H PHASE
GH STATIC
GV STATIC
Only Green moves
NOTE
Do not adjust the center using convergence such as
GH STATIC GV STATIC
Green POINT CONVER MODE , etc.
Considerable load will be imposed on the adjustment
circuit, causing malfunctions.
Three colors R, G, B move together
ADJUSTMENTS
The center adjustment by H PHASE V PHASE adjusts the timing for displaying video signals and therefore current is not
supplied to the deflection york.
Current is on the other hand supplied to the convergence york in the center adjustment by convergence such as GH STATIC
GV STATIC GREEN POINT CONVER MODE , etc. and therefore imposes load on the circuit.
Center