Pioneer RM-V4000V - Manual (Page 68)

67
ADJUSTMENTS
The
&
numbers correspond to the numbers in the flow-
chart.
2 Adjustment signal input
For adjusting size...Monoscope, etc.(EX.LD Test disc GGV1013, FRAME NO. 18001)
For screen joining, linearity, color adjustment...Use adjustment signals such as , cross-hatch, etc.
(EX.LD Test disc GGV1013, FRAME NO. 14401)
If signals are created in the multi video processor, use them.
For RGB inputs, generate the adjustment signals conforming to the above using the models actually used (PC, etc.), and check
them via the expander actually used.
(3) Convergence Adjustment Contents
1 Measurement of screen center
The center can be found easily by pasting threads in the
spaces of the protection panels at the screen frame.
Note
Depending on the user memory used, the image may
become distorted as shown in the figure on the right.
In this case, before adjusting the center, adjust H BLK R
and H BLK L first.
Marked color deviation