Panasonic PT-50LC14 - Manual (Page 14)

14 For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Use this confi guration when connecting the projection display to a cable TV system using VCR.
Note:
• When the RF coaxial cable is connected to the projection display VHF/UHF terminal via a cable box or VCR, set the TV channel
to CH3 or CH4. This does not apply when signal is input from VIDEO INPUT.
Connecting the Antenna / Cable to the RF IN Terminal (VCR)
Or
Installation
Connect the cable from the Output
terminal on the back of the Cable Box
or antenna/cable system to the Antenna
input terminal on the back of the VCR.
VCR
Incoming Cable
from Antenna or
Cable TV System
↑ TO VCR
In from cable
TERMINAL ON
THE BACK OF
THE CABLE BOX
CABLE BOX
↑ TO VCR