Polaris Sawtooth - Manual (Page 39)

36
FEATURES AND CONTROLS
Electrical Switches
1. Light Switch/Hi-Lo Beam Control - The lights won’t turn on
unless the main key switch is on.
2. Engine Stop Switch - The engine will
not start or run when the switch is in the
OFF position. Its purpose is to provide
the operator with a quick means of
engine shutdown in case of an
emergency. To stop the engine, press the
lower end of the rocker switch down to
the OFF position. Before starting the
engine, press the upper end of the switch
down to the ON position.
3. Main Key Switch - Turn the main key
switch clockwise to the ON position
before starting the engine. Turn the
main switch off to stop the engine and
end all electrical power to the vehicle.
4. Start Button - To start the engine, make
sure the stop switch is in the ON
position. Turn the main key switch on.
Press the start button.
1 2
3
4
5
2
3