Lifescan Ultra 2 User Manual

Page 3

Setting up

pg.

your system

Table of contents

• Getting to know your

OneTouch

Ultra

2 Blood

Glucose Meter and Test Strips

• Turning your meter on and off

• Using the meter display

backlight

• Setting up your meter

NOTE: Before testing, read
this owner’s booklet carefully.

Starting the test process

pg.

Insert a test strip
Check the code on the test strip
vial before inserting the strip.
Make sure the three contact
bars are facing you. Push the
strip in as far as it will go. Do
not bend the strip.

The meter will turn on, show a
black start-up screen and then a
code number. The first time you
use the meter, the

CAL CODE

screen will display “––” instead
of a number.

Match the code displayed on
the meter with the code on the
test strip vial
If the code on the meter does
not match the code on the vial,
press

to change the

code. If the display changes to
the

APPLY BLOOD

screen before

you are ready, remove the strip
and re-start the test process.

Press

when the numbers

match.

The meter is ready for testing
when the

APPLY BLOOD

screen

appears.

DCO_06344501B_OU2_OB_USe.qxd 12/21/05 8:03 AM Page ii