LaCie Big Disk Network - Manual (Page 32)

LaCie Big Disk Network Administering Your LaCie Big Disk Network
User Manual page 32
4.3. Groups
Click on the Groups link in the navigation bar to open the Groups
page (
Fig. 40 ). Use this page to create, edit and delete groups.
If you use your Big Disk Network in an office setting where many
different people from different departments need to have access to
the Big Disk Network, setting up groups is a good way to orga-
nize users and to give the most appropriate access to shares. You
can specify which shares groups can access, which users belong to
which groups and enable or disable entire groups.
4.3.1. Adding Groups
To add a group:
1. Click Add on the Groups page ( Fig. 41 ). The Group Profile
page opens ( Fig. 42 ).
2. Enter a name and description for the group. The description
only appears to the administrator as part of the Group Profile
on this page (a,
Fig. 42 ).
3. Select “enabled” to activate the group as soon as your changes
are applied.
4. All user accounts on the Big Disk Network are listed in the User
column. Select the users you want to be in the group.
5. Click Apply (b, Fig. 42 ).
Fig. 40
Fig. 41
Fig. 42