Lincoln Electric 500 - Manual (Page 9)

A-1 INSTALLATION
VANTAGE 500 CUMMINS
A-1
TECHNICAL SPECIFICATIONS - VANTAGE 500 CUMMINS (K2406-1)
INPUT - DIESEL ENGINE
Make /Model Description Speed (RPM) Displacement Starting Capacities
System
CUMMINS 4 cylinder High Idle 1890 199 cu. in 12VDC battery Fuel
B3.3 53HP (40 kw) Low Idle 1400 (3.3L) & Starter 25 US gal.
Diesel Engine @ 1800 RPM Full Load 1890 (94.6L)
Bore x Stroke Oil:
2 US gal.
3.74” x 4.53” (7.6L)
(95mm x 115mm) Coolant
2 US gal. (7.6L)
RATED OUTPUT @ 104°F(40°C) - WELDER
Duty Cycle Welding Output Volts at Rated Amps
100% 500 Amps (DC multi-purpose) 40 Volts
60% 550 Amps (DC multi-purpose) 36 volts
50% 575 Amps (DC multi-purpose) 35 volts
PHYSICAL DIMENSIONS
Height (2) Width Depth Weight
42.0 in 31.5 in. 63.1 in. 1443lbs.
(1066.8 mm) (800.1mm) (1603mm) (655kg)
(Approx)
1. Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2. Top of Enclosure. Add 7.0” (177.8mm) for exhaust.
OUTPUT @ 104°F(40°C) - WELDER AND GENERATOR
Welding Range
30 - 575 Amps CC/CV
20 - 250 Amps TIG
Open Circuit Voltage
60 Max OCV @ 1900 RPM
Auxiliary Power (1)
120/240 VAC
12,000 WATTS, 60 Hz., Single Phase
20,000 WATTS, 60 Hz., Three Phase