La Crosse Technology WS-7212U - Manual (Page 20)

20
c. Place the indoor weather station
onto the screw using the hanging
hole on the backside.
d. Gently pull the indoor weather
station down to lock the indoor
weather station into place.
TROUBLESHOOTING
NOTE: For problems not solved, please
contact La Crosse Technology via e-mail
or phone, or visit our website,
www.lacrossetechnology.com
Problem: The LCD is faint
Solution: Replace batteries
Problem: No outdoor temperature or
humidity is displayed.
Solution:
1) First try to re-establish
communication between the remote
sensor and indoor weather station by
moving both units to within three to
five feet of each other. Wait about