La Crosse Technology WS-7212U - Manual (Page 11)

11
B. INDOOR WEATHER STATION
Note: After the batteries are installed,
DO NOT press any buttons for 15
minutes. This may interfere with the
signal, causing temperatures to register
incorrectly.
1. Remove
the
battery cover
on the
backside. To
do this, push
up and pull
out.
2. Observing the
correct
polarity, install
2 AA
batteries.
3. Replace battery cover.
4. Wait 15 minutes or until both the
indoor and outdoor temperatures
are shown on the indoor weather
station.
Battery cover
Battery
Compartment