La Crosse Technology WS-7212U - Manual (Page 19)

19
A. REMOTE
TEMPERATURE/
HUMIDITY SENSOR
1. Remove the mounting bracket from
the remote temperature/humidity
sensor
2. Mount using either screws or
adhesive tape.
3. Re-attach the remote temp/humidity
sensor to the mounting bracket.
B. THE WEATHER STATION
1. The indoor weather station comes
with the table stand already
mounted. If you wish to use the
table-stand, all that is required is to
place the indoor weather station in
your desired location.
2. To wall mount:
a. Remove the table stand by pulling
down on the stand from the rear and
rotating forward.
b. Fix a screw (not included) into the
desired wall.