Linksys PSUS4 - Manual (Page 27)

20 Chapter 6: Configuring the PrintServer
The Printer Tab - Internet Printing
PrintServer for USB with 4-Port Switch
The Printer Tab - Logical Port
The Logical Printers tab contains the logical printer settings of the PrintServer. Select from the following fields for
each Logical Printer. (See Figure 6-6.)
Select Printer. Select the number (1-3) from the drop-down menu of Logical Printer Port No: you wish to
configure. Click the Get Data button to update the display with the current data for the selected logical printer.
Details
• Pre-string (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer before
each print job. This string cannot exceed 30 characters.
• Post String (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer after
each print job. This string cannot exceed 30 characters.
• Convert LF to CR+LF. If checked, LF (line feed) characters are changed to CR+LF (carriage return + line
feed).
Change these settings as described here and click the Save button to apply your changes or click Cancel to
cancel your changes.
Figure 6-6: Logical Port