Interfaces – Lexmark C762 User Manual
Page 296
Interfaces
8-4
Setting Up the Communications Port Using Windows 2000
In your Windows 2000 application:
1
On the Menu bar, click
Start
.
2
Click
Settings
.
3
Click
Control Panel
. The Control Panel screen appears.
4
Double-click the
System
icon. The System Properties screen appears.
5
Select the
Hardware
tab.
6
In the Device Manager area of the Hardware tab screen, click the
Device
Manager
button. The Device Manager screen appears.
7
Scroll down to Ports and click the
+
once to expand the list of available Ports.
8
Select the communications port you want to configure and double-click.
The Communications Port Properties screen for this specific port displays. For
example, if you select the COM1 port, then the Communications Port [COM1]
Properties screen displays.
9
Click the
Port Settings
tab.
10
Fill out the fields for the following printer settings to make them match your
printer settings:
•
Bits per second
•
Data bits
•
Parity
•
Stop bits
•
Flow Control
Note:
For Flow Control, select Hardware if you want DTR protocol or Xon/
Xoff for Xon/Xoff protocol.
11
Click
OK
.
12
Close all windows now that the port is set up.