Lexmark C762 - Manual (Page 150)

PJL
3-71
Intervention required:
cartridge low 40038 88 Cartridge Low
FALSE
Intervention required:
replace photoconductor kit 40038 Replace PC Kit FALSE
Intervention required:
replace photoconductor kit to continue 40038 Replace PC Kit To Continue FALSE
Intervention required:
replace toner cartridge 40038 Replace Toner Cartridge FALSE
Intervention required:
replace toner cartridge to continue 40038 Replace Toner To Continue FALSE
Intervention required:
replace oil coating roll 40038 Replace Oil Coating Roll FALSE
Intervention required:
cartridge empty 40039 89 Cartridge Empty
FALSE
Intervention required:
load staples 40040 Load Staples FALSE
Intervention required:
priming failed. retry? 40041 Priming Failed. Retry? FALSE
Intervention required:
OPMSG 40048 Message specified by OPMSG FALSE
Intervention required:
STMSG 40049 Message specified by STMSG FALSE
Intervention required:
replace fuser 40050 Replace Fuser FALSE
Intervention required:
replace transfer kit 40050 Replace Transfer Kit FALSE
Intervention required:
incompatible bin x 40087 59 Incompatible Bin x FALSE
Intervention required:
incompatible duplex 40088 59 Incompatible Duplex FALSE
Intervention required:
incompatible tray x 40089 59 Incompatible Tray x FALSE
Intervention required:
incompatible envelope feeder 40090 59 Incompatible Envelope Feeder FALSE
Intervention required:
check duplex connection 40095 Check Duplex Connection FALSE
Table 3-14: PJL Message for Attendance Conditions
Printer State Status Code Display String Online Status
1
XXXX represents a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow and Black cartridges,
respectively. For this message, the values for XXXX are returned to indicate which ink cartridges are defective.
2
represents a one-letter designator for each door labeled on the printer.
3 represents a one-letter designator for each cover labeled on the printer.
Note: The Display String is returned in the current language. A display string that is returned is truncated to the DISPLAY
CHARACTER SIZE returned in INFO CONFIG.