Linksys PCMPC200 v2 - Manual (Page 18)

EtherFast ® 10/100 CardBus PC Cards
31
Linksys Instant EtherFast ® Series
30
3. When the list of available network adapters appears, select Linksys
EtherFast 10/100 CardBus PC Card II. Click the Have Disk button.
4. Put the EtherFast Card driver disk into drive A. Type “a:\” into the box on
your screen and click OK.
5. When the following window appears, select Linksys EtherFast 10/100
CardBus PC Card Adapter II, click OK.
The following steps will install the EtherFast Card’s driver software on your
PC, enabling your PC to properly communicate with the card. Remember that
you must be logged on as a network administrator to continue.
1. Click on Start, Settings, Control Panel, then double-click on the
Network icon.
2. When the networking window appears, choose the Adapters tab. Click the
Add button.
Installing the EtherFast Network Driver if Networking is
Already Installed
N No otte e:: For information
and help on choosing
your bindings, services
and protocols, ask your
network administrator,
or check your Windows
NT documentation.