Linksys AM200 - Manual (Page 28)

23 Chapter 4: Configuring the ADSL Modem
The Administration Tab
ADSL Modem
Firmware Upgrade
Firmware can be upgraded by clicking the Upgrade button after browsing for the firmware, which you can
download from the Linksys website. Do not upgrade your firmware unless you are experiencing problems with
the Modem. For more information about upgrading firmware, refer to “Appendix B: Upgrading Firmware”.
Factory Defaults
Restore Factory Defaults. If you wish to restore the Modem to its factory default settings and lose all your
settings, click Yes.
To begin the restoration process, click the Save Settings button to save these changes, or click the Cancel
Changes button to undo your changes.
Reboot
This tab allows you reboot of your Modem. To reboot your Modem, click the Device Reboot button.
Click the Cancel Changes button if you want to undo your changes.
Figure 4-33: Firmware Upgrade
Figure 4-35: Reboot
Figure 4-34: Factory Defaults