Administration, Status – Linksys AM200 User Manual
Page 13
8
Chapter 4: Configuring the ADSL Modem
Overview
ADSL Modem
•
Port Triggering. To set up triggered ranges and forwarded ranges for Internet applications, click this tab.
•
NAT Mapping Table. This table displays the current NAPT address mappings.
•
DMZ. To allow one local user to be exposed to the Internet for use of special-purpose services, use this
screen.
Administration
•
Management. On this screen, alter Modem access privileges, SNMP, UPnP, and WT-82 settings.
•
SNMP. Use this screen to configure SNMP manager access.
•
Log. If you want to view or save activity logs, click this tab.
•
Diagnostics. Use this screen to do a Ping Test or Traceroute Test.
•
Firmware Upgrade. Click this tab if you want to upgrade the Modem’s firmware.
•
Factory Defaults. If you want to restore the Modem’s factory defaults, use this screen.
•
Reboot. This tab allows you to do a hard reboot of your Modem.
Status
•
Modem. This screen provides status information about the Modem.
•
Local Network. This provides status information about the local network.