Lincoln Mountaineer 1997 - Manual (Page 87)

2. Allow the shoulder belts to fully
retract.
Removing your child from the
built-in child seat
1. Disconnect the chest clip by
squeezing the release tabs together
and pulling the two sides apart.
2. Press the release button on the
crotch buckle.
3. Slide the shoulder belts off the
child’s shoulders and remove child.
If ALR is engaged, hold either left
or right shoulder belt fully out
while helping the child slide his
arms out of the belts.
4. Fold the cushion protector flap
onto the child seat cushion. Slide
the belt tongues up and out of the
way of the cushion, then return
the child seat cushion to the
stowed (upright) position.
5. Slide the Velcro
௡ straps through
the D-rings on the child seat
cushion and attach.
6. Slide head restraint down until
the top of the head restraint is
flush with the top of the adult seat
back.
Seating and safety restraints
87