Linear ACCESS AE-100 - Manual (Page 9)

9
System Options
For most installations the factory settings for the system will be
appropriate. To customize the system, enter programming mode via
telephone or keypad.
Use the programming worksheet supplied to log any system option
changes prior to entering it into the system.
For each of the following steps, enter the Master Password and enter
Programming Mode (if the unit is not already in that mode). Exit
Programming Mode when all programming is complete.
System Display Language
The factory default language is English. Three other languages can be
selected as the language for the user and programming displays.
✦ NOTE: This step cannot be performed remotely through the
telephone.
✦ NOTE: The system supports one display language at a time.
1. Press
2. Choose a language:
Enter 1 for English
Enter 2 for Spanish
Enter 3 for French
Enter 4 for Portuguese
3. Press
Keypad Lockout Count
The system counts the number of invalid Entry Codes entered at the
keypad. If the invalid entries exceeds the lockout count number, the
keypad is locked out for 90 seconds. The factory setting for the lockout
count is three. The lockout value can be from one to nine.
1. Press
2. Enter the number for the lockout count (1-9).
3. Press
Access Relay Activation Time
The factory setting will cause the access relay to activate for 4 seconds.
The activation time can be set from 4-99 seconds to accommodate
different types of access control devices.
1. Press
2. Enter the time (in seconds) for access relay to stay activated (04-99)
3. Press
•
•
•
•
PPN 38
38#LANG#
LANG = SYSTEM DISPLAY LANGUAGE
1 = ENGLISH 2 = SPANISH
3 = FRENCH 4 = PORTUGUESE
SYSTEM DISPLAY LANGUAGE
FACTORY SETTING: ENGLISH
PPN 51
51#COUNT#
COUNT = NUMBER (1-9) OF INCORRECT ENTRIES
THAT WILL CAUSE A 90 SECOND LOCKOUT
KEYPAD LOCKOUT COUNT
FACTORY SETTING: 3 TRIES
PPN 52
52#SECONDS#
SECONDS = ACTIVATION TIME (04-99 SECONDS)
ACCESS RELAY ACTIVATION TIME
FACTORY SETTING: 4 SECONDS
STANDARD PROGRAMMING METHOD