Programming reference & factory defaults, Multi-unit installations – Linear ACCESS AE-100 User Manual
Page 6
6
Programming Reference & Factory Defaults
STANDARD
PROGRAMMING
POSITION
NUMBER
ALTERNATE
FUNCTION
CODE
NUMBER
FUNCTION OF PROGRAMMING STEP
FACTORY
DEFAULT
VALUE
99
91
EXIT PROGRAM MODE
SYSTEM OPTIONS
38
38
SYSTEM DISPLAY LANGUAGE
ENGLISH
51
72
KEYPAD LOCKOUT COUNT
3 TRIES
52
71
ACCESS RELAY ACTIVATION TIME
4 SECONDS
57
10
WELCOME DISPLAY TEXT
LINEAR
ACCESS
TELEPHONE
ENTRY
61
74
AUTOMATIC TELEPHONE ANSWER
ON
62
75
SPEAKER CHIRP ON KEYSTROKES
ON
63
76
SPEAKER TONE ON ACCESS RELAY ACTIVATION
ON
64
70
MAXIMUM VISITOR TALK TIME
60 SECONDS
77
77
RESIDENT CONTROL OF ACCESS RELAY
ON
95
95
RESIDENT CALL-BACK
OFF
ACCESS DATA CONTROL
21
01
ADD A DIRECTORY ENTRY FOR A RESIDENT
22
02
MODIFY AN EXISTING DIRECTORY ENTRY
23
03
DELETE AN EXISTING DIRECTORY ENTRY
31
31
ADD A STAND-ALONE ENTRY CODE
33
33
DELETE A STAND-ALONE ENTRY CODE
SYSTEM UTILITIES
30
30
COPY ACCESS DATA ONLY FROM MASTER TO SUB-UNITS
34
34
COPY ALL DATA FROM MASTER TO SUB-UNITS
80
05
TIMED ACCESS RELAY LATCH
81
05
LATCH ACCESS RELAY
83
05
RELEASE ACCESS RELAY
92
04
DELETE ALL RESIDENT DATA
93
93
DELETE ALL STAND-ALONE ENTRY CODES
Multi-unit Installations
Up to four AE-100 units may be connected to the same dedicated
telephone line to form a simple network. Connecting multiple units allows
transferring programming data (either the directory entries only or the
entire memory’s contents) from the “master” unit to the other sub-units.
In multi-unit installations each AE-100 must be assigned a unique unit
number before programming. The unit number allows connecting to a
specifi c unit when calling for programming and identifi es the other units
to the master unit. One unit must be assigned as “Master Unit #1”.
Pre-set Unit Numbers
Your access control installation company has already programmed this
system. If this is a multiple unit installation, the sub-unit numbers have
been set in the sub-units, and the master unit was also programmed to
recognize those numbers.
The unit numbers and locations for this installation are:
UNIT #
UNIT TYPE
UNIT LOCATION
1
MASTER UNIT
2
SUB-UNIT
3
SUB-UNIT
4
SUB-UNIT