Technical specifications, Installation, Technical specifications – power mig 200 – Lincoln Electric POWER MIG SVM157-A User Manual
Page 8
INSTALLATION
A-2
POWER MIG 200
A-2
75°C Copper Wire
75°C Copper Wire
Input Ampere
in Conduit
in Conduit
Input Voltage/
Fuse or Breaker
Rating On
AWG (IEC) Sizes
AWG (IEC) Sizes
(For lengths
(For lengths
Frequency (Hz)
Size (Super Lag)
Nameplate
up to 100 ft.)
exceeding 100 ft.)
208/60
60
36
10 (6 mm2)
8 (10 mm2)
230/60
60
33
10 (6 mm2)
8 (10 mm2)
NOTE: Use #10 AWG Grounding Wire
TECHNICAL SPECIFICATIONS – POWER MIG 200
INPUT – SINGLE PHASE ONLY
RATED OUTPUT
OUTPUT
RECOMMENDED INPUT WIRE AND FUSE SIZES
Height
Width
Depth
Weight
31.79 in
18.88 in
38.78 in
210 Ibs
808 mm
480 mm
985 mm
95 kg
PHYSICAL DIMENSIONS
Wire Speed
50 – 700 IPM (1.27 – 17.8 m/minute)
WIRE SPEED RANGE
Standard Voltage/Frequency
Input Current @ 150 Amp Rated Output Input Current @ 150 Amp Rated Output
208/230/60 Hz
28/26 Amps
36/33
Duty Cycle
Amps
Volts at Rated Amperes
30%
200 Amps
22 Volts
40%
180 Amps
23 Volts
60%
150 Amps
24 Volts
Welding Current Range
Maximum Open Circuit Voltage
Welding Voltage Range
30 – 200 Amps
40 Volts
13.5-22 Volts