beautypg.com

LG LRM-519 User Manual

Page 68

background image

68

<<< continued

If using wireless broadband connection:

Make sure the Recorder is receiving an IP address. On the Start

menu, select Settings > System Information and confirm there is

an IP address and that the IP address is correct.

Make sure your network settings are correct. On the Start menu,

select Settings > Phone and Network Setup.

Make sure your broadband serivce is working. If other devices such

as a computer in your home also connect to your broadband service,

check to make sure you have service from those devices. If not,

contact your broadband service provider for more information.

If using a dial-up connection:

Make sure your phone line is connected to the back of the Recorder

and to a phone jack.

Make sure your phone service is working. Try to make a phone call

using the same phone line.

Make sure there are no messages waiting signals on your phone line.

Make sure your dial-up settings are correct. On the Start menu,

select Settings > Phone and Network Setup.

If you switched your connection from dial-up or wireless to wired

(Ethernet) and cannot connect to the service:

1.

Check for the Recorder IP address. On the Start menu, select

Settings > Settings > System Information. Write down the

IP address.

2.

Go to a computer connected to your network. Open a command

window (on the Start menu in Windows

®

XP, select Run and then

type cmd and select OK), type ping followed by the IP address

for the Recorder and press ENTER. If the request fails, then there

is a network error. See your network documentation for more

information.

Your subscription may have expired. Visit www.

microsoftprogramguide.com to determine the status of your

subscription. To continue to receive Guide listings and schedule

recordings of your favorite shows, the Recorder must be connected

the Microsoft Program Guide service. Try connecting again. To

connect again, download the Guide listings. On the Start menu,

select Settings > Guide Settings > Get Latest Guide Listings and

then select Download Now.