Lanier 5622 User Manual
Page 76
Appendix
68
7
Exceeded max. number of pages (500 pages)
per file.
Do you want to store the scanned pages as 1 file?
The maximum number of pages per file is 500.
Specify whether to use the data or not. Scan
the page that could not read once more as a
new file.
Exceeded max. number of stand-by files.
Try again after the data transmission is com-
pleted.
There are 50 standby files in the sending queue
for the delivery server. Wait until files have
been sent.
Exceeded max. page capacity per file.
Only the scanned data will be transmitted.
Scan the remaining data after transmission.
Because the number of scanned pages reaches
the maximum value for delivery, only the data
already scanned is transmitted. Retransmit the
remaining pages.
Memory is full.
Cannot scan.
Because of insufficient hard disk capacity, the
first page could not be fully scanned. Try one
of the following measures.
• Wait for a while and retry the scan operation.
• Reduce the scan area.
• Delete unneeded stored files.
Memory is full.
Cannot scan. Stored files delivery is only avail-
able.
Note
❒ These messages are shown alternately.
There is not enough remaining hard disk ca-
pacity. No more files can be stored. Delete un-
needed files.
Memory is full.
Delete the unnecessary stored file.
Note
❒ These messages are shown alternately.
There is not enough remaining hard disk ca-
pacity. Delete unneeded files.
Memory is full.
Press [Transmit] to transmit the scanned data.
To delete the data, press [Cancel].
Because there is not enough hard disk capacity
in the machine, the page could only be partially
scanned. Specify whether to use the data or not.
Memory is full. Scanning has been cancelled.
Do you want to store the scanned data?
Because there is not enough hard disk capacity
in the machine, the page could only be partially
scanned. Specify whether to use the data or not.
Memory is full. Scanning has been cancelled.
Press [Transmit] to transmit the scanned data.
To delete the data, press [Cancel].
Because there is not enough hard disk capacity
in the machine, the page could only be partially
scanned. Specify whether to use the data or not.
No destination is programmed for this
number.
The short ID number that can be assigned to
each destination is not programmed in the de-
livery server. Assign a correct number to each
destination.
Message
Possible Cause and Action