Lanier 5622 - Manual (Page 54)

Delivering Stored Scan Data by the Network Delivery Scanner
46
5
B Select the desired resolution,
original size, and other items
to change the settings.
The way to make scan settings is
the same way as programing
scan settings. See p.14 “Setting
Scanner Features”.
C Press [OK].
The scan settings are applied.
F
Select the destination.
You can select the destination from
the list of destinations or by speci-
fying a short ID number.
When selecting a destination
from the list
A Press [Update Address] to update
the list of destinations.
Note
❒ If the destination informa-
tion programmed in the de-
livery server is updated, the
list displayed on the control
panel of the machine is not
updated automatically. To
display the latest informa-
tion for operation, press the
[Update Address]
on the con-
trol panel before delivering
scan data to update the dis-
played information.
❒ If the list is updated after the
destination or sender is se-
lected, any selections are can-
celled. Update the list before
selecting destination and
sender.
❒ If there is scan data in the
memory of the machine that
have not yet been delivered,
[Update Address]
is not availa-
ble.
B Press the title for the desired
destination and select the des-
tination.
If the desired destination is not
OK, press [
U U U U] or [T T T T] to display
the destination.
Note
❒ The destination titles are pro-
grammed in the delivery
server.
C Select the destination to which
the scan data is to be sent.
The selected destination is high-
lighted, and also appears in the
destination field at the top of the
screen. A line appears over the
title of the category to which the
destination belongs.