Lucent Technologies 9077 16S User Manual
Page 73
Configuring the SP Switch Router Adapter
Verify SP Switch Router Adapter card from router
SP Switch Router Adapter Guide - 1.4 Update 2
October 22, 1999
2-39
To reset the card in slot 4 and return debug information, enter:
# grreset -d 4
The hold reset option (-h) has numerous uses, here are three.
–
To isolate a possible problem, set all cards to hold reset and bring them on-line one at
a time.
–
To determine whether a card is affecting other media cards, put that one in hold reset
to verify what is happening.
–
If certain cards cannot restart while under heavy load from the router switch, you can
put all cards in hold reset and then bring up those cards having trouble first while the
switch load is light.
These commands hold either all or one media card in reset:
# grreset all -h
# grreset
slot -h
Refer to the command section in the GRF Reference Guide for a description of grreset.