Lucent Technologies 9077 16S - Manual (Page 120)

B-6 October 22, 1999 SP Switch Router Adapter Guide - 1.4 Update 2
Log Messages
Message descriptions
“Descriptor Sync Error from RC, int1=%d”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: FATAL
DESCRIPTION: This message is logged when the RX-CPU detects that the CPU and the
RC are out-of-synch. This is a fatal error. The card is reset and automatically reloaded.
int1 is the content of the RC’s interrupt register.
“Descriptor Sync Error from TC, int1=%d”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: FATAL
DESCRIPTION: This message is logged when the TX-CPU detects that the CPU and the
TC are out-of-synch. This is a fatal error, the card is reset and reloaded automatically.
int1 is the content of the TC’s interrupt register.
“Discarding msg, unknown msg_type 0x%x”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_rx.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: WARNING
DESCRIPTION: This message is logged when the SP Switch Router Adapter card
receives a message with unknown message type. This message is an indication of software
mismatched between processor nodes and the gateway node (SP Switch Router Adapter
card). To correct the problem, upgrade the nodes with the latest released microcode..
“ERR! Duplicated buffer %d”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_rx.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: WARNING
DESCRIPTION: This message is logged when the RX CPU has detected a duplicated
condition of a buffer. This is an indication that there is an error in the receive logic. The
receive logic will attempt to recover from the error. If the problem persists, please contact
Customer Support.