Lenovo THINKCENTRE 8804 User Manual
Page 31
2.
Pivot
the
drive
bay
assembly
upward
to
gain
access
to
the
hard
disk
drive.
3.
Disconnect
the
signal
and
power
cables
from
the
rear
of
the
optical
drive.
4.
Slide
the
optical
drive
lock
1
to
the
unlocked
position.
5.
Open
the
door
at
the
front
of
the
optical
drive
and
slide
it
out
the
front
of
the
computer.
6.
Install
the
new
optical
drive
into
the
bay.
7.
Slide
the
optical
drive
lock
to
the
locked
position.
8.
Connect
the
signal
and
power
cables
to
the
rear
of
the
optical
drive.
9.
Go
to
Chapter
2.
Replacing
hardware
23
This manual is related to the following products: