LevelOne FBR-1404TX - Manual (Page 97)

LevelOne Broadband VPN Gateway User Guide
15. Click the Tunnel Setting tab, then select The tunnel endpoint is specified by this IP ad-
dress. Enter the WAN (Internet) IP address of the LevelOne Broadband VPN Gateway, as
shown below.
Figure 73: Tunnel Setting
16. Click the Authentication Methods tab, then click the "Edit" to see the screen like the
example below.
Figure 74: Authentication Method
17. Select Use this string to protect the key exchange (preshared key), then enter your pre-
shared key in the field provided.
18. Click "OK" to save your changes and return to the Authentication Methods tab of the Edit
Rule Properties screen.
94