LevelOne FBR-1404TX - Manual (Page 89)

LevelOne Broadband VPN Gateway User Guide
Examples
This section describes some examples of using the LevelOne Broadband VPN Gateway in
common VPN situations.
Example 1: Connecting 2 LevelOne Broadband VPN Gateways
In this example, 2 LANs are connected via VPN.
Figure 62: Connecting 2 LevelOne Broadband VPN Gateways
Note
• The LANs MUST use different IP address ranges.
• Both endpoints have fixed WAN (Internet) IP addresses.
Configuration Settings
Setting LAN A Gate-
way LAN B Gate-
way Notes
Name Policy 1 Policy 1 Name does not affect
operation. Select a mean-
ingful name.
Remote Endpoint 205.17.11.43 202.11.13.211 Other endpoint's WAN
(Internet) IP address.
Local
IP addresses Any Any Use a more restrictive
definition if possible.
Remote
IP addresses 192.168.1.1 to
192.168.1.254 192.168.0.1 to
192.168.0.254 Address range on other
endpoint.
Use a more restrictive
definition if possible.
Key Exchange IKE IKE Must match
IKE SA Parameters
IKE Direction Both ways Both ways Does not have to match.
Either endpoint can block
1 direction.
Local Identity IP address IP address IP address is the most
common ID method
Remote Identity IP address IP address IP address is the most
common ID method
86