LevelOne FBR-1404TX - Manual (Page 94)

VPN
Figure 67: Filter Properties: Addressing
8. Enter the Source IP address and the Destination IP address.
• Since this is the outing filter, the Source IP address is "My IP address" and the Desti-
nation IP address is the address range used on the remote LAN.
• Ensure the Mirrored option is checked.
9. Click "OK" to save your settings and close this dialog.
Figure 68: New Rule Properties: IP Filter List
10. On the resulting screen (above), ensure the "To DUT" filter is selected, then click the
Filter Action tab to see a screen like the following
91